Titanium tube heat exchangers in the field of petroleum fittings

Under the conditions of petroleum mechanical processing, the following titanium equipment can be manufactured using titanium alloys: titanium heat exchangers, filters (precipitators), tanks for storing petroleum and petroleum products, locking devices, sewage pipelines and rough oil pipelines.

Certain petrochemical companies and the petroleum processing industry have experience in the manufacture and use of titanium equipment.

For evaporation (concentration) or distillation or in the weak acid or other chloride-containing solutions for the reaction and so on can be used with titanium lined containers, and then for the use of nitric acid on the nitriding of organic materials and for other with the oxidizing medium for the chemical reaction of the containers used can be used with titanium lined containers. Titanium-lined containers can be used for chromic acid solutions and sulfurized chromic acid solutions, depending on the reaction temperature.

In a certain range of applications in the chemical raw materials industry, it has been demonstrated that copper and other gas-containing solutions can be used as catalysts for the catalytic oxidation of chlorocarbons at a defined pH value. When catalyzing at temperatures of about 150 to 200 t:, appropriate equipment must be installed, and acetaldehyde production equipment made of titanium is widely used. Towers, piping, valves utilizing titanium as a liner, and acid pumps employing a rotor and stator are made of engineered pure titanium. Acetic acid purification often uses distillation columns, and most of the assembly included in the fractionation stage is made of titanium. For example, the middle layer of the tower and connectors for distillation units.

Serpentine tube heaters, which prevent the formation of metal sulfates, have been tested to increase heat transfer by 30% compared to aluminum-plated copper serpentine tube heaters. For the urea reactor, in order to obtain (recover) carbon black and in order to eliminate stress, it is necessary to use a reactor tower with a diameter of 43 m and a length of 8.2 m that withstands a temperature of 120 T and a pressure of 130 kPa, which reduces the pressure of the gas and various other gases, and this equipment is made of titanium.

Ti Tube or Ti Pipe's field of application is further extended to the crude oil and petroleum processing industry, from seawater to fresh water or drinking water desalination equipment or organic acid production equipment are used titanium. At the same time, pumps and conduits and heat exchangers made from welded titanium tubes are proven to be reliable and durable. Titanium Plate are used in the electrolysis of copper to make titanium seed plates for cathodes.